
If you have a clogged bathroom sink, there is no need to look for a plumber to solve this problem. Free your clogged bathroom sink yourself. Read this article to know how to unclog bathroom sink
1. Pour boiling water

Boiling water is an age-old remedy to unclog bathroom sinks. The heat of the boiling water softens the clog, making it easier to remove.
To use boiling water to unclog bathroom sink, fill a pot with enough hot water to cover the clogged area. Bring the pot of hot water to a boil on your stovetop. Carefully pour the boiling hot water over the clogged area in your sink. Let the hot water sit for several minutes to soften and loosen up any gunk or debris blocking your drainpipe. Use a plunger to try and dislodge any remaining material from your drainpipe. If plunging doesn’t work, you may need to use a plumbing snake or auger to clear out any remaining debris from your pipes.
2. Use baking soda and vinegar

There are many ways to unclog bathroom sink, but one of the most common and easiest ways is to use baking soda and vinegar. Baking soda is a natural abrasive that can help break up clogs, while vinegar helps to dissolve them.
To unclog bathroom sink using baking soda and vinegar, start by pouring a pot of boiling water down the drain. Next, mix together 1/2 cup of baking soda with 1 cup of vinegar in a bowl or measuring cup. Pour this mixture into the drain and let it sit for about an hour. After an hour has passed, pour another pot of boiling water down the drain to clear away any remaining debris.
3. Use de-clogging chemicals

If the 2 natural methods do not work, however, using de-clogging chemicals might be the solution. De-clogging chemicals might be the solution De-clogging chemicals come in a variety of forms, including liquids, gels, and powders. They are all designed to break down the blockage in your sink so that it can be easily removed. Some de-clogging chemicals also work as descalers, which means that they can help get rid of any built-up lime or calcium deposits on your pipes. This is important because these deposits can often cause sinks to become clogged in the first place.
If you’re considering using a de-clogging chemical to unclog bathroom sink, there are a few things you should keep in mind. First of all, make sure that you read the instructions carefully before use. Each type of de-clogging chemical will have its own specific instructions on how to use it safely and effectively. Secondly, always test the chemical on an inconspicuous area of your sink before applying it directly to the blockage itself. This will help ensure that the chemical doesn’t damage or discolor your sink’s surface finish
You can de-clogging chemicals at the supermarket. Purchase one, follow the instruction on how to use it and pour it into the sink drain. Let the chemicals sit in the drain for several minutes before you try to find out if worked. De-clogging chemicals work by dissolving the gunk that is clogging the drain, which you can then simply wash away once the clogging material is dissolved. If the de-clogging chemicals didn’t work the first time, try putting more chemicals the second time. You can then proceed to the next suggestion if using the chemicals doesn’t seem to be effective.
4. Use a plunger

You can then try using the plunger to unclog bathroom sink. A plunger is an essential tool for anyone with a bathroom sink. When the sink becomes clogged, the plunger can be used to clear the obstruction and restore water flow.
Get a plunger and fill your sink with water just enough that it will cover the plunger head. Then, block the overflow with a rug to ensure that pressure from the plunger into the pipe will not escape. Once ready, place the plunger in the sink to cover the drain. And with force, quickly pump the plunger several times. After that, remove the plunger from the sink so you can determine if it worked. You can try using the plunger again another couple of times if it didn’t work the first time before you move on to the next step.
5. Remove the P-trap

If your bathroom sink is clogged, the common step is to remove the P-trap. The P-trap is a curved piece of pipe that connects the drainpipe from the sink to the main drainage system. It’s held in place by two nuts at either end.
If the clogged material is located in the P-trap and it won’t be freed with the two previous methods, you can manually remove the clogged material. First, you must remove the P-trap. Use a wrench to loosen the nuts that keep the P-trap in place. Be sure to have a bucket directly underneath the P-trap to catch the trapped water that will flow out of the pipes once the P-trap is loosened. Then, once the P-trap is removed, determine where the clog is and take this out. Flush the P-trap with running water to thoroughly clean it and then return this back in place under the sink.
6. Use a plumber’s snake

When a bathroom sink becomes clogged, using a plumber’s snake can be an effective way to clear the obstruction. A plumber’s snake is a long, flexible metal cable that is inserted into the drainpipe to remove the blockage. The snake is rotated and pushed through the pipe until it dislodges the clog.
If you decide to use a plumber’s snake to unclog bathroom sink, be sure to follow these steps:
- Shut off the water supply to the sink by turning off the valve under or behind it.
- Attach one end of the snake cable to a drill or other power tool. Be very careful not to let go of it once it’s turned on!
- Insert the other end of the cable into the elevated drainpipe of the sink and rotate it back and forth several times until the clog is dislodged. If necessary, push and pull on then Snake while rotating to help move it along the sink pipeline.
Once them Clog has been cleared, turn on thee faucet and allow hot water to run for several minutes into the sink to purge any remaining debris from the drainpipe before using it to more than one hour later.
Conclusion
These are 6 of the best tips and tricks to quickly unclog bathroom. Hopefully, at least one of them will work for you the next time you find yourself with a clogged sink. But if these don’t work, it might be time to call in a professional.